Classes for representing and processing articulations. Specific articulations are modeled as Articulation subclasses.
A Note object has a articulations attribute. This list can be used to store one or more music21.articulation.Articulation subclasses.
As much as possible, MusicXML names are used for Articulation classes, with xxx-yyy changed to XxxYyy. For instance, “strong-accent” in MusicXML is “StrongAccent” here.
Fingering and other playing marks are found here. Fermatas, trills, etc. are found in music21.expressions.
>>> n1 = note.Note("D#4")
>>> n1.articulations.append(articulations.Tenuto())
>>> n1.show()
>>> c1 = chord.Chord(["C3","G4","E-5"])
>>> c1.articulations = [articulations.OrganHeel(), articulations.Accent() ]
>>> c1.show()
A longer test showing the utility of the module:
>>> s = stream.Stream()
>>> n1 = note.Note('c#5')
>>> n1.articulations = [articulations.Accent()]
>>> n1.quarterLength = 1.25
>>> s.append(n1)
>>> n2 = note.Note('d5')
>>> n2.articulations = [articulations.StrongAccent()]
>>> n2.quarterLength = 0.75
>>> s.append(n2)
>>> n3 = note.Note('b4')
>>> n3.articulations = [articulations.Staccato()]
>>> n3.quarterLength = 1.25
>>> n3.tie = tie.Tie('start')
>>> s.append(n3)
>>> n4 = note.Note('b4')
>>> n4.articulations = [articulations.Staccatissimo()]
>>> n4.quarterLength = 0.75
>>> s.append(n4)
>>> n5 = note.Note('a4')
>>> n5.articulations = [articulations.Tenuto()]
>>> n5.quarterLength = 1.3333333333333
>>> s.append(n5)
>>> n6 = note.Note('b-4')
>>> n6.articulations = [articulations.Staccatissimo(), articulations.Tenuto()]
>>> n6.quarterLength = 0.6666666666667
>>> s.append(n6)
>>> s.metadata = metadata.Metadata()
>>> s.metadata.title = 'Prova articolazioni' # ital: "Articulation Test"
>>> s.metadata.composer = 'Giuliano Lancioni'
>>> s.show()
Base class for all Articulation sub-classes.
>>> x = articulations.Articulation()
>>> x.placement = 'below'
Articulation bases
Articulation read-only properties
Read-only properties inherited from Music21Object:
Articulation read/write properties
Get or set the volumeShift of this Articulation. This value, between -1 and 1, that is used to shift the final Volume of the object it is attached to.
>>> at1 = articulations.StrongAccent()
>>> at1.volumeShift > .1
True
Read/write properties inherited from Music21Object:
Articulation methods
Methods inherited from Music21Object:
Articulation instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from Music21Object:
Accent bases
Accent read-only properties
Read-only properties inherited from Music21Object:
Accent read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
Accent methods
Methods inherited from Music21Object:
Accent instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from DynamicArticulation:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
Bowing bases
Bowing read-only properties
Read-only properties inherited from Music21Object:
Bowing read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
Bowing methods
Methods inherited from Music21Object:
Bowing instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
BrassIndication bases
BrassIndication read-only properties
Read-only properties inherited from Music21Object:
BrassIndication read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
BrassIndication methods
Methods inherited from Music21Object:
BrassIndication instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
Boolean value for quickly identifying Spanner objects (False by default).
Boolean value for quickly identifying Variant objects (False by default).
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from WindIndication:
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
BreathMark bases
BreathMark read-only properties
Read-only properties inherited from Music21Object:
BreathMark read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
BreathMark methods
Methods inherited from Music21Object:
BreathMark instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from LengthArticulation:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
Caesura bases
Caesura read-only properties
Read-only properties inherited from Music21Object:
Caesura read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
Caesura methods
Methods inherited from Music21Object:
Caesura instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
DetachedLegato bases
DetachedLegato read-only properties
Read-only properties inherited from Music21Object:
DetachedLegato read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
DetachedLegato methods
Methods inherited from Music21Object:
DetachedLegato instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from LengthArticulation:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
Doit bases
Doit read-only properties
Read-only properties inherited from Music21Object:
Doit read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
Doit methods
Methods inherited from Music21Object:
Doit instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from IndeterminantSlide:
Instance variables inherited from PitchArticulation:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
DoubleTongue bases
DoubleTongue read-only properties
Read-only properties inherited from Music21Object:
DoubleTongue read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
DoubleTongue methods
Methods inherited from Music21Object:
DoubleTongue instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from TonguingIndication:
Instance variables inherited from WindIndication:
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
DownBow bases
DownBow read-only properties
Read-only properties inherited from Music21Object:
DownBow read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
DownBow methods
Methods inherited from Music21Object:
DownBow instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from Bowing:
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
Superclass for all articulations that change the dynamic of a note.
DynamicArticulation bases
DynamicArticulation read-only properties
Read-only properties inherited from Music21Object:
DynamicArticulation read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
DynamicArticulation methods
Methods inherited from Music21Object:
DynamicArticulation instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
Boolean value for quickly identifying Spanner objects (False by default).
Boolean value for quickly identifying Stream objects (False by default).
Boolean value for quickly identifying Variant objects (False by default).
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
Falloff bases
Falloff read-only properties
Read-only properties inherited from Music21Object:
Falloff read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
Falloff methods
Methods inherited from Music21Object:
Falloff instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from IndeterminantSlide:
Instance variables inherited from PitchArticulation:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
FretBend bases
FretBend read-only properties
Read-only properties inherited from Music21Object:
FretBend read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
FretBend methods
Methods inherited from Music21Object:
FretBend instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from FretIndication:
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
FretIndication bases
FretIndication read-only properties
Read-only properties inherited from Music21Object:
FretIndication read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
FretIndication methods
Methods inherited from Music21Object:
FretIndication instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
FretTap bases
FretTap read-only properties
Read-only properties inherited from Music21Object:
FretTap read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
FretTap methods
Methods inherited from Music21Object:
FretTap instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from FretIndication:
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
specifies plucking fingering for fretted instruments
pluck in musicxml
FrettedPluck bases
FrettedPluck read-only properties
Read-only properties inherited from Music21Object:
FrettedPluck read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
FrettedPluck methods
Methods inherited from Music21Object:
FrettedPluck instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from FretIndication:
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
HammerOn bases
HammerOn read-only properties
Read-only properties inherited from Music21Object:
HammerOn read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
HammerOn methods
Methods inherited from Music21Object:
HammerOn instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from FretIndication:
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
Harmonic bases
Harmonic read-only properties
Read-only properties inherited from Music21Object:
Harmonic read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
Harmonic methods
Methods inherited from Music21Object:
Harmonic instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
musicXML – fingernails
HarpFingerNails bases
HarpFingerNails read-only properties
Read-only properties inherited from Music21Object:
HarpFingerNails read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
HarpFingerNails methods
Methods inherited from Music21Object:
HarpFingerNails instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
Boolean value for quickly identifying Spanner objects (False by default).
Boolean value for quickly identifying Variant objects (False by default).
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from HarpIndication:
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
HarpIndication bases
HarpIndication read-only properties
Read-only properties inherited from Music21Object:
HarpIndication read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
HarpIndication methods
Methods inherited from Music21Object:
HarpIndication instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
IndeterminantSlide bases
IndeterminantSlide read-only properties
Read-only properties inherited from Music21Object:
IndeterminantSlide read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
IndeterminantSlide methods
Methods inherited from Music21Object:
IndeterminantSlide instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
Boolean value for quickly identifying Spanner objects (False by default).
Boolean value for quickly identifying Stream objects (False by default).
Boolean value for quickly identifying Variant objects (False by default).
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from PitchArticulation:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
Superclass for all articulations that change the length of a note.
LengthArticulation bases
LengthArticulation read-only properties
Read-only properties inherited from Music21Object:
LengthArticulation read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
LengthArticulation methods
Methods inherited from Music21Object:
LengthArticulation instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
Boolean value for quickly identifying Spanner objects (False by default).
Boolean value for quickly identifying Stream objects (False by default).
Boolean value for quickly identifying Variant objects (False by default).
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
not in MusicXML
NailPizzicato bases
NailPizzicato read-only properties
Read-only properties inherited from Music21Object:
NailPizzicato read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
NailPizzicato methods
Methods inherited from Music21Object:
NailPizzicato instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from Pizzicato:
Instance variables inherited from Bowing:
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
OpenString bases
OpenString read-only properties
Read-only properties inherited from Music21Object:
OpenString read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
OpenString methods
Methods inherited from Music21Object:
OpenString instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from Bowing:
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
OrganHeel bases
OrganHeel read-only properties
Read-only properties inherited from Music21Object:
OrganHeel read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
OrganHeel methods
Methods inherited from Music21Object:
OrganHeel instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from OrganIndication:
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
OrganIndication bases
OrganIndication read-only properties
Read-only properties inherited from Music21Object:
OrganIndication read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
OrganIndication methods
Methods inherited from Music21Object:
OrganIndication instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
Boolean value for quickly identifying Spanner objects (False by default).
Boolean value for quickly identifying Variant objects (False by default).
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
OrganToe bases
OrganToe read-only properties
Read-only properties inherited from Music21Object:
OrganToe read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
OrganToe methods
Methods inherited from Music21Object:
OrganToe instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from OrganIndication:
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
Superclass for all articulations that change the pitch of a note.
PitchArticulation bases
PitchArticulation read-only properties
Read-only properties inherited from Music21Object:
PitchArticulation read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
PitchArticulation methods
Methods inherited from Music21Object:
PitchArticulation instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
Boolean value for quickly identifying Spanner objects (False by default).
Boolean value for quickly identifying Stream objects (False by default).
Boolean value for quickly identifying Variant objects (False by default).
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
in MusicXML, Pizzicato is an element of every note. Here we represent pizzes along with all bowing marks.
Pizzicato bases
Pizzicato read-only properties
Read-only properties inherited from Music21Object:
Pizzicato read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
Pizzicato methods
Methods inherited from Music21Object:
Pizzicato instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from Bowing:
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
Plop bases
Plop read-only properties
Read-only properties inherited from Music21Object:
Plop read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
Plop methods
Methods inherited from Music21Object:
Plop instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from IndeterminantSlide:
Instance variables inherited from PitchArticulation:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
PullOff bases
PullOff read-only properties
Read-only properties inherited from Music21Object:
PullOff read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
PullOff methods
Methods inherited from Music21Object:
PullOff instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from FretIndication:
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
Scoop bases
Scoop read-only properties
Read-only properties inherited from Music21Object:
Scoop read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
Scoop methods
Methods inherited from Music21Object:
Scoop instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from IndeterminantSlide:
Instance variables inherited from PitchArticulation:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
SnapPizzicato bases
SnapPizzicato read-only properties
Read-only properties inherited from Music21Object:
SnapPizzicato read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
SnapPizzicato methods
Methods inherited from Music21Object:
SnapPizzicato instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from Pizzicato:
Instance variables inherited from Bowing:
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
Spiccato bases
Spiccato read-only properties
Read-only properties inherited from Music21Object:
Spiccato read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
Spiccato methods
Methods inherited from Music21Object:
Spiccato instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from Staccato:
Instance variables inherited from LengthArticulation:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
Staccatissimo bases
Staccatissimo read-only properties
Read-only properties inherited from Music21Object:
Staccatissimo read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
Staccatissimo methods
Methods inherited from Music21Object:
Staccatissimo instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from Staccato:
Instance variables inherited from LengthArticulation:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
Staccato bases
Staccato read-only properties
Read-only properties inherited from Music21Object:
Staccato read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
Staccato methods
Methods inherited from Music21Object:
Staccato instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from LengthArticulation:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
Stopped bases
Stopped read-only properties
Read-only properties inherited from Music21Object:
Stopped read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
Stopped methods
Methods inherited from Music21Object:
Stopped instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from WindIndication:
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
Stress bases
Stress read-only properties
Read-only properties inherited from Music21Object:
Stress read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
Stress methods
Methods inherited from Music21Object:
Stress instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from DynamicArticulation:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
MusicXML – fingering
StringFingering bases
StringFingering read-only properties
Read-only properties inherited from Music21Object:
StringFingering read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
StringFingering methods
Methods inherited from Music21Object:
StringFingering instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
Boolean value for quickly identifying Spanner objects (False by default).
Boolean value for quickly identifying Variant objects (False by default).
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from Bowing:
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
StringHarmonic bases
StringHarmonic read-only properties
Read-only properties inherited from Music21Object:
StringHarmonic read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
StringHarmonic methods
Methods inherited from Music21Object:
StringHarmonic instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from Bowing:
Instance variables inherited from Harmonic:
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
StringIndication bases
StringIndication read-only properties
Read-only properties inherited from Music21Object:
StringIndication read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
StringIndication methods
Methods inherited from Music21Object:
StringIndication instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
Boolean value for quickly identifying Spanner objects (False by default).
Boolean value for quickly identifying Variant objects (False by default).
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from Bowing:
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
MusicXML – thumb-position
StringThumbPosition bases
StringThumbPosition read-only properties
Read-only properties inherited from Music21Object:
StringThumbPosition read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
StringThumbPosition methods
Methods inherited from Music21Object:
StringThumbPosition instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
Boolean value for quickly identifying Spanner objects (False by default).
Boolean value for quickly identifying Stream objects (False by default).
Boolean value for quickly identifying Variant objects (False by default).
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from Bowing:
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
StrongAccent bases
StrongAccent read-only properties
Read-only properties inherited from Music21Object:
StrongAccent read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
StrongAccent methods
Methods inherited from Music21Object:
StrongAccent instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from Accent:
Instance variables inherited from DynamicArticulation:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
TechnicalIndications (MusicXML: technical) give performance indications specific to different instrument types, such as harmonics or bowing.
TechnicalIndication bases
TechnicalIndication read-only properties
Read-only properties inherited from Music21Object:
TechnicalIndication read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
TechnicalIndication methods
Methods inherited from Music21Object:
TechnicalIndication instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
Boolean value for quickly identifying Spanner objects (False by default).
Boolean value for quickly identifying Stream objects (False by default).
Boolean value for quickly identifying Variant objects (False by default).
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
Tenuto bases
Tenuto read-only properties
Read-only properties inherited from Music21Object:
Tenuto read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
Tenuto methods
Methods inherited from Music21Object:
Tenuto instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from LengthArticulation:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
Superclass for all articulations that change the timbre of a note.
TimbreArticulation bases
TimbreArticulation read-only properties
Read-only properties inherited from Music21Object:
TimbreArticulation read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
TimbreArticulation methods
Methods inherited from Music21Object:
TimbreArticulation instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
Boolean value for quickly identifying Spanner objects (False by default).
Boolean value for quickly identifying Stream objects (False by default).
Boolean value for quickly identifying Variant objects (False by default).
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
TonguingIndication bases
TonguingIndication read-only properties
Read-only properties inherited from Music21Object:
TonguingIndication read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
TonguingIndication methods
Methods inherited from Music21Object:
TonguingIndication instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
Boolean value for quickly identifying Spanner objects (False by default).
Boolean value for quickly identifying Stream objects (False by default).
Boolean value for quickly identifying Variant objects (False by default).
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from WindIndication:
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
TripleTongue bases
TripleTongue read-only properties
Read-only properties inherited from Music21Object:
TripleTongue read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
TripleTongue methods
Methods inherited from Music21Object:
TripleTongue instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from TonguingIndication:
Instance variables inherited from WindIndication:
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
Unstress bases
Unstress read-only properties
Read-only properties inherited from Music21Object:
Unstress read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
Unstress methods
Methods inherited from Music21Object:
Unstress instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from DynamicArticulation:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
UpBow bases
UpBow read-only properties
Read-only properties inherited from Music21Object:
UpBow read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
UpBow methods
Methods inherited from Music21Object:
UpBow instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from Bowing:
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
WindIndication bases
WindIndication read-only properties
Read-only properties inherited from Music21Object:
WindIndication read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
WindIndication methods
Methods inherited from Music21Object:
WindIndication instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object:
WoodwindIndication bases
WoodwindIndication read-only properties
Read-only properties inherited from Music21Object:
WoodwindIndication read/write properties
Read/write properties inherited from Articulation:
Read/write properties inherited from Music21Object:
WoodwindIndication methods
Methods inherited from Music21Object:
WoodwindIndication instance variables
Property which returns an number (int or otherwise) depending on the class of the Music21Object that represents a priority for an object based on its class alone – used as a tie for stream sorting in case two objects have the same offset and priority. Lower numbers are sorted to the left of higher numbers. For instance, Clef, KeySignature, TimeSignature all come (in that order) before Note.
All undefined classes have classSortOrder of 20 – same as note.Note
>>> m21o = base.Music21Object()
>>> m21o.classSortOrder
20
>>> tc = clef.TrebleClef()
>>> tc.classSortOrder
0
>>> ks = key.KeySignature(3)
>>> ks.classSortOrder
1
New classes can define their own default classSortOrder
>>> class ExampleClass(base.Music21Object):
... classSortOrderDefault = 5
...
>>> ec1 = ExampleClass()
>>> ec1.classSortOrder
5
An instance of a Group object which describes arbitrary Groups that this object belongs to.
if set to True will not print upon output (only used in MusicXML output at this point and Lilypond for notes, chords, and rests).
A unique identification string (not to be confused with the default .id() method.
Boolean value for quickly identifying Spanner objects (False by default).
Boolean value for quickly identifying Stream objects (False by default).
Boolean value for quickly identifying Variant objects (False by default).
if set, defines the display x-position from the start of the container (in musicxml “tenths” by default)
Instance variables inherited from WindIndication:
Instance variables inherited from TechnicalIndication:
Instance variables inherited from Articulation:
Instance variables inherited from Music21Object: